硬支承的平衡原理,测量精度高
既可以做单件平衡,也可无需拆解对整体组件直接平衡
转子换型方便,操作简单
模块化结构满足各种不同的应用
cab830测量系统带有图形显示的彩色液晶tft显示器(cab920可选项),通常转子特性定标功能是标准配置。
针对b级和c级防护要求提供不同的防护装置
转子参数/机器规格 rotor data/machine size | 单位/unit | hs10 | hs20-h | hs20-l | hs30 | hs40 |
滚轮上方最大转子重量 max.rotor weight on rollers | kg | 18 | 120 | 120 | 300 | 3000 |
机器床身长度 length of machine base | mm | 500 | 750 | 750 | 1500 | 2000 |
两摆架支承间距 distance between the bearing pedestal centre lines | mm | 15-450 | 50-640 | 50-580 | 50-1300 | 50-1740 |
摆架上端面距床身高度 the height from the edge of bearing pedestal to machine base | mm | 105 | 240 | 430 | 430 | 510 |
永久定标转速限制值 wn2-value for permanent calibration | 106kg/min2 | 80 | 180 | 180 | 280 | 710 |
最小可达剩余不平衡量(每面每公斤) umar/kg/plane | gmm | 0.1 | ||||
不平衡量减少率(urr)unbalance reduction ratio(urr) | % | 95 |